§
The appliance must not be cleaned w ith a high or low pressure jet.
§
Do not bleach.
§
Do not handle the appliance w hile hot.
§
Do not touch the hot surfaces.
§
Leave the appliance to cool prior to handling or cleaning it.
§
This device is prohibited outside.
§
Place the appliance on a dry and stable surface, and slightly back from the edge and at least 2 0 cm
from any w all or element liable to be affected by heat.
§
Take care: Do not insert a sheet of tin foil or any other material or object (risk of damage) betw een
the plate and the frame (ventilation area).
§
Do not block the ventilation holes of the plastic base, under the frame.
§
Caution: Do not use this device w ith w ood or coal to other energy source than that for w hich it
provides (electrical energy).
§
W e recommend you keep the original packaging in order to store the appliance.
KEEP THESE IN STRUCTIO N S
Technical description
These models are designed for professional use.
Strong and reliable, they are convenient to use thanks to the constant temperature and even and fast
cooking.
Characteristics
§
O ne or tw o crepe griddle(s) crepe maker on stainless steel frame
§
Cast iron griddle
§
Pow er: 2 5 0 0 to 4 8 0 0 W depending on the model
§
O ne to three elements which evenly distribute heat over the griddle
§
A thermostat fitted w ith a control knob graduated from 5 0 to 3 0 0 °C
§
A orange indicator light to show heating period
§
An O n/ O ff sw itch w ith green light only on the follow ing models: CEBIA3 , CEBIA4 , CEBIA5 ,
CECIE3 , CECIE4 , CECIG 3 ET CECIG 4 .
§
Three or four plastic feet depending on the model
Instructions
Work surface
Choose an easy-to-clean w ork surface on w hich to install the appliance. The appliance must be at least
2 0 cm from any vertical surfaces that are not heat-resistant in order to prevent damage by heat radiating
from the plates. To ensure maximum ease of use, the top of the irons should be betw een 8 5 and 9 5 cm
from the ground.
∅
3 5 , 4 0 or 4 8 cm
- 1 0 -