Flash Time; Key Tone On/Off; Change Pin Code - switel DE12 Bedienungsanleitung

7.7

Flash time

The R button can be assigned one of seven different Flash times in
order to be able to use functions in private branch exchanges or
supplementary services offered by your telephone network provider.
The following Flash times are available: 1= 80 ms,
2= 100 ms, 3= 120 ms, 4= 180 ms, 5= 250 ms, 6= 300 ms, 7= 600 ms
”, R
2^7
1 to 7, ”
7.8

Key tone on/off

An acoustic signal is issued each time a button on the handset is
pressed.
Changing the setting enables or disables the key tone.
”, 7, ”
7.9

Change PIN code

The PIN code is comprised of four digits. The default setting of the PIN
code is "0000". If you change a PIN code, keep a note of the new PIN
code in a safe place. In case you forget or lose your PIN code, please
contact your sales outlet.
”, 1
ë oooo , ”
ë oooo , ”
ë oooo , ”
− Setting Up the Telephone −
Enable programming mode
The current setting is shown
Select and confirm a Flash time
Press to enable or disable the key
tone
Enable programming mode
Enter the PIN code and confirm
Enter the new PIN code and confirm
Enter the new PIN code again and
confirm
79