Special Functions; Dialling Mode; Temporary Tone Dialling - switel DE12 Bedienungsanleitung

8

Special Functions

8.1

Dialling mode

The telephone can be operated in new, digital exchanges (TONE / 2) as
well as analogue exchanges (PULSE / 1).
”, *, 1 or 2, ”

8.1.1 Temporary tone dialling

If you only operate the telephone using the PULSE dialling mode, you
can still make use of the advantages of the TONE dialling mode
(e.g.: remote access of the answering machine in the conventional
telephone network). You can temporarily switch to Tone dialling when a
connection has already been made.
1 sec *
When the call is ended, the equipment automatically switches back to
Pulse dialling.
8.2 Entering a dialling pause manually
It is possible to insert a dialling pause manually after the number for an
outside line to be able to continue dialling directly without waiting for the
dialling tone.
2 sec 0
After dialling the number for the outside line, the telephone waits 3
seconds
before dialling the actual phone number.
8.3 R button on private branch exchanges
If the telephone is connected to a private branch exchange, all the
functions associated with the R button R such as transferring calls,
automatic call back, etc., can be used. When used on a private branch
exchange, a Flash time of 100 ms must be set. The dealer where you
purchased the exchange can provide information as to whether the
telephone will work properly with the exchange.
− Special Functions −
Setting the dialling mode
Press the button when a connection
has been established
Insert dialling pause
81