Touch & Dial; Flash Time - switel DE122 Bedienungsanleitung

- Setting Up the Telephone -
7.5 Touch & dial
Use this function to store a set phone number that will be dialled when
any button (except ”) is pressed.
7.5.1 Saving a touch & dial number
”, 3
ë, ”
ë, 2 x ”
7.5.2 Touch & dial on/off
Select a setting to enable or disable the Touch & Dial function. If it is
enabled, the saved phone number is shown on the display.
”, 2
ë, 2 x ”
7.6 External answering machines
Assuming your telephone network provider makes an external
answering machine available to you, the phone number for calling the
external answering machine can be assigned to key 1.
The external answering machine is an optional service from the network
provider. Contact your network provider for further information.
7.6.1 Saving the phone number of the external answering machine
”, 8
ë, ”
ë, ”
7.6.2 Phoning the external answering machine
2 sec 1
7.7

Flash time

The R button can be assigned one of seven different Flash times in
order to be able to use functions in private branch exchanges or
supplementary services offered by your telephone network provider.
The following Flash times are available: 1= 80 ms,
2= 100 ms, 3= 120 ms, 4= 180 ms, 5= 250 ms, 6= 300 ms, 7= 600 ms
”, R
2^7
Enable programming mode
Enter the PIN code and confirm
Enter and confirm a phone number
Enable programming mode
Enter the PIN code and confirm
Enable programming mode
Enter the PIN code and confirm
Enter and confirm a phone number
Connect to the external answering
machine
Enable programming mode
The current setting is shown
73