Operation Und Button Functions; Power Switch (O/I) - Klarstein 10033000 Bedienungsanleitung

OPERATION UND BUTTON FUNCTIONS

(C)
1 On/Off Press to turn ON or OFF the unit
2 Flame Press and hold to switch Flame or Ambient Light
3 Heat Press to djust Heating Power, or "Confirm"
4 Temp. Press to set Room Temperature
5 Timing Timer
6 Set up Display unit status

Power Switch (O/I)

• The main Power Switch must be turned ON in order to operate by Remote
Controller or Manual Control Board.
• If the power switch was turned off, then all functions off, while settings would be
reserved for one week.
• When the fireplace is not in use or is to be cleaned or maintained, the main power
switch must be turned off, and the plug should be removed.
• The fireplace is operated via the remote control (C). The display (D) shows the
current status of the heater.
(D)
(E)
EN
23