Cameo AURO BEAM 200 DC Bedienungsanleitung Seite 100

Device Settings
13
(please read remark 1*)
Ch. Function
1 Pan
2 Pan fine
3 Tilt
4 Tilt fine
5 Dimmer
6 Strobe
100
000 - 005 no function
006 - 020 Blackout while Moving on (Hold 3s)
021 - 035 Blackout while Moving off (Hold 5s)
036 - 050 Lamp On (Hold 3s)
051 - 065 Lamp Off (Hold 5s)
066 - 080 Invert Pan on (Hold 3s)
081 - 095 Invert Pan off (Hold 5s)
096 - 110 Invert Tilt on (Hold 3s)
111 - 125 Invert Tilt off (Hold 5s)
126 - 140 Reset Pan / Tilt (Hold 3s)
141 - 155 Reset only Head (Hold 3s)
156 - 170 Reset All Functions (Hold 3s)
171 - 255 no function
16 CH Mode
000 - 255 0% to 100%
000 - 255 0% to 100%
000 - 255 0% to 100%
000 - 255 0% to 100%
000 - 255 0% to 100%
000 - 005 Strobe open
006 - 010 Strobe closed
011 - 033 Pulse Random, slow -> fast
034 - 056 Ramp up Random, slow -> fast
057 - 079 Ramp down Random, slow -> fast
080 - 102 Random Strobe Effect, slow -> fast
Strobe Break Effect, 5s.....1s (Short burst with
103 - 127
break)
128 - 250 Strobe slow -> fast <1Hz - 13Hz
251 - 255 Strobe open
Values
Device Settings
Sub-Group
Pan
Tilt
Dimmer
Multifunctional
Strobe