Working - Stihl RE 232 Gebrauchsanleitung

English
Machine with hose reel
NOTICE
Always completely unroll the high-
pressure hose from the hose reel. The
high water pressure causes the high-
pressure hose to expand. This can also
damage the hose reel or high-pressure
hose.
1
Pull out hose reel stop (1)
N
Completely unroll the high-pressure
N
hose
46

Working

Actuate the spray gun
Point the spray gun at the object to
N
be cleaned – never at persons!
Point the rotary nozzle downwards
N
when starting (if fitted)
1
Press the safety latch (1) in the
N
direction of the arrow – the lever (2)
is unlatched
Squeeze the lever (2)
N
The engine starts automatically and
stops again as soon as the lever (1) is
released. The machine is then in
standby mode.
Standby mode
NOTICE
The machine must not be operated in
standby mode for more than 5 minutes.
Switch off the machine at the master
switch – see "Switching off the
machine",
if work is interrupted for more than
–
5 min,
during breaks,
–
if the machine is left unattended.
–
Pressure/quantity control on the
machine
Only RE 272 PLUS, RE 282 PLUS
Working pressure and water flow rate
can be set on the high-pressure pump
for long-term adjustment in line with the
cleaning job concerned.
2
1
Turn the knob (1) to set the working
N
pressure and water flow rate
The pressure in the high-pressure pump
is indicated by a pressure gauge (2).
RE 232, RE 272 PLUS, RE 282 PLUS