Setting The Equalizer (Eq7) - Sony CDX-M800 Bedienungsanleitung

*1 When Clock mode is set to on:
– The time is always displayed in the main display
window when normal play mode is selected from
"Selecting the display mode and display image"
(page 24) and "A.IMG-off" is selected (page 21).
– The time is always displayed in the sub display
window.
*2 "Contrast" appears only in the sub display window.
You can adjust the contrast of the sub display
window only.
Sound
• HPF (High pass filter)
– to select the cut-off frequency to "78Hz,"
"125Hz," or "off."
• LPF (Low pass filter)
– to select the cut-off frequency to "78Hz,"
"125Hz," or "off."
• Loud (Loudness)
– to enjoy bass and treble even at low volumes.
The bass and treble will be reinforced.
• AUX Level (page 25)
– to adjust the volume level of connected
auxiliary equipment.
Play Mode
• AF on/off (Alternative frequences) (page 16)
• Local on/off (Local seek mode) (page 14)
– Select "on" to only tune into stations with
stronger signals.
• Mono on/off (Monaural mode) (page 14)
– Select "on" to hear FM stereo broadcast in
monaural. Select "off" to return to normal
mode.
• Regional on/off (page 16)
1
Press (MENU).
To set Demo, press (OFF), then press
(MENU).
To set A.Scroll, press (MENU) during CD/
MD playback.
2
Press M or m repeatedly until the
desired item appears.
3
Press < or , to select the desired
setting (Example: "on" or "off").
4
Press (ENTER).
After the mode setting is completed, the
display returns to normal play mode.
Note
The displayed item will differ depending on the source.
Tip
You can easily switch among categories by pressing M
or m for 2 seconds.
22

Setting the equalizer (EQ7)

You can select an equalizer curve for 7 music
types (Xplod, VOCAL, CLUB, JAZZ, NEW
AGE, ROCK, CUSTOM), and OFF (equalizer
off).
You can store and adjust the equalizer settings
for frequency and level.
You can store the EQ7 setting for each source.
Selecting the equalizer curve
1
Press (SOURCE) to select a desired
source.
2
Press (EQ7) repeatedly until the
desired equalizer curve.
Each time you press (EQ7), the item
changes.
To cancel the equalizing effect, select "OFF."
After 3 seconds, the display returns to the
normal play mode.