Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
b. Keep warm after boiling: Press "BOIL" button and keep-warm button(70 °C/80 °C/90 °C) at the
same time, both red lamps in "BOIL" button and keep-warm button illumine. When the water is
boiled, the kettle stops heating, and the lamp in "BOIL" button turns blue and the lamp in keep-
warm button stays red; and when the water cools down to required temperature, the lamp in the
keep-warm button turns blue that means the kettle enters keep-warm mode. After keeping warm
for 30 minutes, all the lamps shut off and enter standby mode.
c. Heat water to required temperature and keep warm: Press keep-warm button (70 °C/80 °C/
90 °C), the red lamp in the button illumines; when the water is heated up to required temperature,
the lamp in the button turns blue. After keep warm for 30 minutes, the blue lamp shuts off and the
kettle enter standby mode.
5. Lift the kettle from the power base and then pour the water.
6. The kettle may be stored on the power base when not in use. The kettle will not re-boil until the switch
is pressed again
Notes:
• During the keep-warm mode, if you pour cool water into the kettle and let the water temperature cool
down over 10 °C, the kettle will re-heat again until the water temperature is up to last-required tempera-
ture.
• Boil dry: When pressing buttons without water, the kettle is dry burn and will stop heat within 35 seconds,
and enter standby mode.
• Power off: Keep warm after 30 min,the kettle will auto get into standby mode or at the status of pressed
"100 °C (boil) button, then pressed "100 °C (boil) button again, the kettle will also get into standby mode.
• Memory feature: The kettle features an internal "memory" that lets you leave the kettle off the base for
up to 1 minute without it going into standby mode. When returned to the base, it will restart the heating
and/or keep warm cycles right where they left off.
Cleaning
Always disconnect the appliance from the power outlet before cleaning! Never immerse the kettle,
power cord or power base in water, or allow moisture to contact with these parts.
• Wipe the appearance of body with a mild and damp cloth or cleaner, never use a toxic cleaner.
CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to clean the outside of the kettle
so as to prevent the gloss loss

Cleaning and Care

12

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis