Glass Cleaning - AHT VENTO GREEN MC FREEZE 234 Betriebsanleitung

AHT Cooling Systems GmbH
▶ Do not use abrasive, chemically-aggressive cleaning
agents.
Cleaning equipment:
All cleaning equipment must be clean.
For cleaning:
For the exterior:
Soft, damp cotton cloth or paper towel.
For drying:
For the exterior:
Soft, slightly damp cotton cloth or paper towel.
NOTICE
Material damage due to incorrect cleaning equipment.
Damage to surfaces.
▶ Do not use hard, pointed objects.
cleaning steps for the exterior:
∙ Glass cleaning see ➙
∙ Clean the side panels, appliance frame,
∙ protective strips, head panel and foot plate.
∙ Clean handles, front side of doors and door frames.
∙ Subsequently dry all cleaned surfaces.
∙ Clean the fl oor in front of the appliance.
cleaning steps for the interior:
∙ Transfer products to another appliance with the same
product temperature class.
∙ Glass cleaning see ➙
∙ Perform cleaning tasks quickly. Doors can be held
open briefl y.
∙ Open the glass door to an opening angle of 90°.
∙ Door must remain open independently.
NOTICE
Material damage resulting from hard clothing items
(studs, buttons etc.) coming into contact with interior
glass surfaces. Destruction of the coating results in loss
of function.
▶ Do not hold the door open with the body.
∙ Remove food residue (e.g. due to broken packaging)
and loose packaging.
∙ Remove contamination and ice from seals
(see ➙ Fig. 10). Clean seals from top to bottom.
Fig. 10: Cleaning seals
∙ Perform a visible inspection of the drain and drain fi lter
(found underneath the air intake grille).
If there are any further cleaning requirements, contact
maintenance services (see

10.1.2 Glass cleaning

Safe handling of glass doors and glass elements (see
Chapter 1.3)
347345_1116
Chapter 10.1.2
Chapter 10.1.2
➙ Chapter 10.4).
Risk of glass breakage. Cutting injuries on the body.
▶ Pay attention to open passageways when the glass
doors are open.
▶ Do not place loads on the glass doors.
▶ Do not open the glass doors beyond an opening
angle of 90°.
Disposal of broken glass. cutting injuries
on hands and the body.
▶ Wear protective gloves to remove shattered
glass fragments and any products damaged
by it.
▶ Carefully and completely remove all
shattered glass fragments and damaged
products.
Dispose of shattered glass fragments in an environmen-
tally appropriate manner.
Property damage in the event of broken glass doors /
glass elements.
▶ With a broken glass door, operation of the appli-
ance is no longer possible.
▶ Remove all products from the damaged appliance
and transfer them to a functioning appliance with
the same product temperature class.
▶ Contact maintenance services (see
10.4).
Glass types:
Coated glass
In order to maintain the properties of the glass used and
the corresponding plastic profi les and seals, the following
cleaning instructions must be observed.
Material damage by placing stickers and fi lms on glass
surfaces. Surfaces can be damaged while removing
stickers/fi lms. Destruction of the coating results in loss
of function.
▶ Do not place any stickers or decorative fi lms on
glass surfaces.
cleaning glass surfaces
cleaning intervals:
Regularly and as needed
time of cleaning:
Exterior (room temperature): Any time
cleaning agent for exterior glass:
Special cleaning wipes soaked with ethanol. Available
as an accessory through maintenance services (see
Chapter 10.4).
Material damage due to incorrect cleaning agent. Dam-
age to surfaces. Destruction of the coating.
➙
▶ Do not use grinding, abrasive cleaning agents.
cAutiON
NOTICE
➙ Chapter
NOTICE
NOTICE
➙
43