Attaching The Pressure Cuff - GERATHERM Desktop 2.0 GT-6630 Gebrauchsanweisung

Preparation for Use

Attaching the Pressure Cuff

1. Wrap the cuff around the left arm. The arm should
be bare.
2. Fasten the cuff. Don't pull it too strongly or make
the cuff too tight. The edge of the cuff should be
approximately 1 inch from the crease of your elbow.
3. Attach the cuff on the right arm as shown in the fi g-
ure if it is not possible to measure on the left arm.
39
EN