Menu Explanations - Sanyo VCC-9000EBCP Bedienungsanleitung

MENU EXPLANATIONS

The menu settings are divided into six
sub-menus.
Main menu
SYSTEM INFORMATION
LENS
CAMERA
PAN/TILT PARAMETERS
AUTO MODE
PRIVACY MASK
·END
NOTE:
The menu screens are cleared
automatically if no menu operations are
carried out for two minutes or more.
Press the MENU button to re-display
them.
Menu settings are all stored
automatically in case of problems such
as power outages.
If you tilt the joystick lever vertically and
hold it in that position, the ·
automatically moves up or down.
Furthermore, if you tilt and hold the
joystick lever for 10 seconds or more
while changing a setting, the speed at
which the setting changes will increase.
English
SYSTEM SETTINGS (SYSTEM INFORMATION) (See p16)
CAMERA INFORMATION
DISPLAY CONFIGURATION
PASSWORD CHANGE
FACTORY DEFAULT
RESET
·BACK
LENS SETTINGS (LENS) (See p21)
ZOOM SPEED
EL ZOOM
JOYSTICK AUTO
AUTO FOCUS
AUTO IRIS
IRIS LEVEL
DAY/NIGHT
·BACK
CAMERA SETTINGS (CAMERA) (See p25)
SENSE UP
SHUTTER
WHITE BALANCE :ATW
BLC
·BACK
position
PAN AND TILT SETTINGS (PAN/TILT PARAMETERS) (See p28)
AUTO STOP IDLE
PROPORTIONAL PAN:ON
SET NORTH
·BACK
AUTOMATIC MODE SETTINGS (AUTO MODE) (See p31)
PRESET POSITION
SEQUENCE
TOUR
AUTO PAN
SET ZONE
FUNCTION IDLE :OFF
FUNCTION
·BACK
MASKING SETTINGS (PRIVACY MASK) (See p40)
MASK No. :
SET
ACTIVATE :
·BACK
A Camera ID settings and title settings
(CAMERA INFORMATION)
B Screen display settings (DISPLAY
CONFIGURATION)
C Changing the password
(PASSWORD CHANGE)
D Restoring camera settings to their default
settings (FACTORY DEFAULT)
E Resetting settings (RESET)
A Zoom speed settings (ZOOM SPEED)
:HIGH
B
Electronic zoom maximum ratio settings
:OFF
:BOTH
(EL ZOOM)
:005
C
Automatic restore mode settings
:005
:040
(JOYSTICK AUTO)
:AUTO
D Automatic focus restore time settings
(AUTO FOCUS)
E Automatic iris restore time setting
(AUTO IRIS)
F Iris level settings (IRIS LEVEL)
G Day/Night settings (DAY/NIGHT)
(VCC-9100P series only)
A Sensitivity increase settings (SENSE UP)
:OFF
B Shutter speed setting (SHUTTER)
:OFF
C White balance settings (WHITE BALANCE)
:OFF
D Backlight compensation settings (BLC)
A
Settings using joystick operations
:020
(AUTO STOP IDLE)
B Panning speed settings for different zoom
rations (PROPORTIONAL PAN)
C
Lens starting point position setting
(SET NORTH)
A Preset position settings
(PRESET POSITION)
B Sequential mode settings (SEQUENCE)
C Tour mode settings (TOUR)
D Automatic pan settings (AUTO PAN)
:OFF
E Zone settings (SET ZONE)
F Automatic restore standby time settings
(FUNCTION IDLE)
G Automatic restore function settings
(FUNCTION)
001 Masking number setting
Masking display setting
OFF
- 15 -