Pioneer EFX-1000 Bedienungsanleitung Seite 17

9 BYPASS button / indicator
When this button is set to ON, the audio input connector
signals are fed directly to the output connectors, bypassing
the effector circuits.
When the audio input/output connectors are connected
directly in this way, the indicator flashes.
10 EFFECT OUT LEV. dial
When effects are set to ON, this dial can be used to control
the effect output level. Adjustment range is –∞ to +6dB.
Beat Effect section
11 BPM COUNTER display
Displays the beats-per-minute of the input source, or the
TAP input. The indicator flashes during automatic BPM
calculation. When power is first turned on, the counter will
flash [120 BPM].
12 EFFECT TIME display
Displays actual effect time.
When power is first turned on, defaults to [500 mSec].
13 BPM measurement mode display
(AUTO, MIDI, TAP).
Displays the BPM measurement mode.
14 MIDI display
Lights when handling MIDI data.
15 RHYTHM TAP display
Displays the tap count input in the rhythm mode.
16 Beat effect select button / indicator
(DELAY, ECHO, PITCH ECHO, TRANS, FLANGER,
FILTER, PHASER).
Use to select the beat effect. All buttons light, and selected
effect button flashes.
When power is turned ON, DELAY flashes.
17 BEAT EFFECTS indicator
Lights when beat effects are ON.
18 BEAT EFFECTS lever switch (OFF/ON/ON-LOCK)
Pull the lever toward you [ON] to output beat-effected
sounds.
In the middle position beat effects are [OFF]; push the lever
away from you to lock the lever in the [ON/LOCK] position
(effects are locked ON). When pulled to the [ON] position,
beat effects are output only while the lever is held; when
your finger is released, the lever returns to middle [OFF]
position.
19 EFFECT FREQUENCY select buttons (LOW/MID/HI)
Use to select the frequency band of the sounds to which
beat effects will be applied. The button of the selected band
will light.
When power is first turned ON, all three of the ranges LOW,
MID, and HI are selected. If all three range buttons are OFF,
no beat effects will be applied to sounds.
BEFORE USE (CONTROLS AND FUNCTIONS)
20 Beat select buttons / indicators
(1/8, 1/4, 1/2, 3/4, 1/1, 2/1, 4/1, 8/1)
[During BPM mode]
When a BPM is measured automatically or input manually,
the beat select button [1/1] is selected by default. The effect
is synchronized automatically to the BPM, and the
corresponding effect time is displayed.
If a beat select button is then pressed, the effect is newly
synchronized to the corresponding multiple of the BPM (1/
8, 1/4, 1/2, 3/4, etc.), thus allowing one-touch change of the
BPM synchronization multiple. In turn, the selected beat
select button lights, thus showing to what multiple of the
actual BPM the effect is synchronized, as well as the
multiple of the time parameter.
[During RHYTHM mode]
When the rhythm input with the TAP button is established,
[1/1] is selected and a multiple of the rhythm can be
selected with the beat select buttons.
21 Beat effect beat-interval indicators
The indicators light to show the period of the effect time.
22 Beat effect TIME/BPM dial
When rotated the effect time selected with the beat select
buttons can be changed as desired.
If the dial is rotated while depressing the TAP button, the
BPM can be set as desired (BPM manual input).
23 BPM MODE button / indicator
Use to turn BPM mode ON, and to select tempo
measurement mode (AUTO/MIDI/TAP). During BPM mode,
the button lights.
If the TAP button is pressed (tapped) during BPM mode,
the mode switches to manual BPM measurement mode.
When power is first turned, the mode defaults to AUTO
measurement mode.
24 TAP/SHIFT button / indicator
[During BPM mode]
When this button is tapped, the BPM manual measurement
mode is selected, and the interval between two taps
(maximum interval 2 seconds) is measured; the
corresponding EFFECT TIME and BPM count is displayed,
and the beat select button [1/1] is selected.
If the TIME/BPM dial is rotated while pressing this button,
the BPM can be adjusted to an optional value (BPM manual
input).
[During RHYTHM mode]
When this button is tapped, the rhythm is input (maximum
tap interval 2 seconds, up to maximum rhythm count 8).
The beat select button [1/1] is selected.
[Tap indicator]
Lights during normal use; goes out only when TAP is
pressed.
25 Rhythm REC button
Clears the currently input rhythm and allows input of a new
rhythm.
17
<DRB1368>