Setting A Programme - Electrolux WAL4E201 Benutzerinformation

16 www.electrolux.com
3. To use powder detergent, turn the flap
up.
4. To use liquid detergent, turn the flap
down.
B
1
A
With the flap in the
position DOWN:
• Do not use gelatinous
• Do not put more liquid
2
• Do not set the
• Do not set the delay
5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent
dispenser.
Make sure that the flap does not cause a
blockage when you close the drawer.

10.5 Setting a programme

1. Turn the programme knob and set the
programme:
• The related programme indicator
comes on.
• The indicator of Start/Pause -
Départ/Pause flashes.
• The display shows: the default
temperature, the spin speed, the
indicators of the programme
phases and the programme
duration.
2. If necessary, change the temperature,
the spin speed, the cycle duration, or
add available options. When you
activate an option, the indicator of the
set option comes on.
If you set something
incorrect, the display shows
the message Err.
10.6 Starting a programme
without the delay start
Press button Start/Pause - Départ/Pause
to start the programme.
The relevant indicator stops to flash and
stays on.
On the display the indicator of the phase is
operation starts to flash.
The programme starts, the door is locked.
The display show the indicator
or thick liquid
detergents.
detergent than the
limit showed in the
flap.
prewash phase.
start function.
.