Using Remote Access - switel DCT6071 Bedienungsanleitung

10. Remote Access
You can call your answering machine from any Touchtone
mobile phone whilst you are away from home to listen to your messages.
PIN Code for remote access
A 3-digit PIN code is required for remote access to your answering
machine. The default code is '000' but for security reasons you should
change this to a code personal to you.
Changing the PIN code
2 sec PINCODE (Under base)
Press the key at any time to exit from changing the PIN code and
return to standby. The PIN code will then remain unchanged.
Switel DCT6071.indd 89 Switel DCT6071.indd 89
phone or
TM
Announces the current security code
and prompts for 1st digit
Select the 1st digit
Confi rm the digit
Select the 2nd digit
Confi rm the digit
Select the 3rd digit
Confi rm the digit. Your new security
code will be announced.
Call in to check your messages
Dial your own phone number and wait
until the answering machine picks up
the call.
Switch to remote access and enter
2 x ,
your 3 digit PIN code after the voice
prompt.
If you enter your PIN code incorrectly, the answering machine will hang
up the call.
If you enter your PIN code correctly you can now remotely control your
answering machine by using the digits on the keypad.

Using Remote Access

GB
89
6/6/08 14:22:42 6/6/08 14:22:42