Herunterladen Inhalt Inhalt Diese Seite drucken

First Flight Preparation; Flying Checklist; Charging Warnings; Battery Charging - Blade Mach 25 FPV Racer Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Mach 25 FPV Racer:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

First Flight Preparation

• Remove and inspect contents
• Begin charging the flight battery
• Program your computer transmitter
• Familiarize yourself with the controls
• Install the flight battery in the quadcopter
(once it has been fully charged)
• Bind your transmitter
• Find a suitable area for flying

Charging Warnings

CAUTION: All instructions and warnings must be
followed exactly. Mishandling of Li-Po batteries can
result in a fire, personal injury and/or property damage.
• NEVER LEAVE CHARGING BATTERIES UNATTENDED.
• NEVER CHARGE BATTERIES OVERNIGHT.
• By handling, charging or using the included Li-Po battery,
you assume all risks associated with lithium batteries.
• If at any time the battery begins to balloon or swell,
discontinue use immediately. If charging or discharging,
discontinue and disconnect. Continuing to use, charge or
discharge a battery that is ballooning or swelling can result
in fire.
• Always store the battery at room temperature in a dry area
for best results.
• Always transport or temporarily store the battery in a tem-
perature range of 40–120º F (5–49° C). Do not store battery
or model in a car or direct sunlight. If stored in a hot car, the
battery can be damaged or even catch fire.
• Always charge batteries away from flammable materials.

Battery Charging

NOTICE: Refer to your charger manual for specific charging instructions.
CAUTION: Only use chargers specifically designed to charge the included Li-Po battery. Failure to do so could
result in fire, causing injury or property damage.
CAUTION: Never exceed the recommended charge rate.
CAUTION: Once charging is complete, immediately remove the battery. Never leave a battery connected to the
charger.
EN

Flying Checklist

❏ Always turn the transmitter on first
❏ Plug the flight battery into the lead from the 4-in-1 ESC
❏ Allow the receiver and ESC to initialize and arm
❏ Fly the model
❏ Land the model
❏ Unplug the flight battery from the 4-in-1 ESC
❏ Always turn the transmitter off last
• Always inspect the battery before charging.
• Always disconnect the battery after charging, and let the
charger cool between charges.
• Always constantly monitor the temperature of the battery
pack while charging.
• ONLY USE A CHARGER SPECIFICALLY DESIGNED TO CHARGE
LI-PO BATTERIES. Failure to charge the battery with a
compatible charger may cause a fire resulting in personal
injury and/or property damage.
• Never discharge Li-Po cells to below 3V under load.
• Never cover warning labels with hook and loop strips.
• Never leave charging batteries unattended.
• Never charge batteries outside recommended levels.
• Never charge damaged batteries.
• Never attempt to dismantle or alter the charger.
• Never allow minors to charge battery packs.
• Never charge batteries in extremely hot or cold places
(recommended between 40–120° F or 5–49° C) or place in
direct sunlight.
4

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis