Herunterladen Inhalt Inhalt Diese Seite drucken

Transmitter Setup Table; Safe Technology; Flight Mode And Rate Selection - Blade Mach 25 FPV Racer Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Mach 25 FPV Racer:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Transmitter Setup Table

"Model
Transmitter
Type"
DX6i
Acro
DX7S
Acro
DX8
Acro
DX6, DX7, DX9,
Airplane
DX18
Technology
Revolutionary SAFE
(Sensor Assisted Flight Envelope) technology uses an innovative combination of multi-axis sensors
®
and software that allows model aircraft to know its position relative to the horizon. This spatial awareness is utilized to
create a controlled flight envelope the aircraft can use to maintain a safe region of bank and pitch angles so you can fly
more safely. Far beyond stability, this level of protection offers multiple modes so the pilot can choose to develop his or
her skills with a greater degree of security and flight control that always feels crisp and responsive.
SAFE
technology delivers:
®
• Flight envelope protection you can enable at the flip of a switch.
• Multiple modes let you adapt SAFE
Best of all, sophisticated SAFE
to use and optimized to offer the best possible flight experience.
FlySAFERC.com

Flight Mode and Rate Selection

• In stability low angle mode, the controls provide a minimum bank angle.
• In stability high angle mode, the controls provide for a maximum bank angle.
• In agility mode, the system does not self level. Use rates and expo to tune the performance according to your flying style.
Refer to the Transmitter Setup Table for transmitter switch selection and specific setup information.
Transmitter Programming
Setup List
GEAR POS (0) GEAR : ↑ 100%;
GEAR/F MODE POS (1) GEAR : ↓ 48%
Reverse: Gear – R
Throttle Cut: ACT
Mixing
Mix 1:
ACT; Gear > Gear ACT
Rate D 0%, U -100%
SW: GEAR, Trim: INH
Mix 2:
ACT; Gear > Gear ACT
Rate D 0%, U +100%
SW: ELE D/R, Trim INH
System Setup
Switch Select
Flap = INH
Gear = INH
F Mode = Gear
Reverse: N/A
Throttle Cut: Mix 1
System Setup
Switch Select
Flap = INH
Gear = INH
F Mode = Gear
Reverse: N/A
Throttle Cut: Mix 1
System Setup
Channel Assign, [NEXT]
Gear set to switch B
Servo Setup: All Norm
Throttle Cut: Switch H
technology to your skill level instantly.
®
technology doesn't require any work to enjoy. Every aircraft with SAFE
®
Flight Modes:
GEAR (0), ELE D/R (0) = Stability low bank angle
GEAR (1), ELE D/R (0) = Stability high bank angle
GEAR (1), ELE D/R (1) = Agility
Flight Modes:
Flap sw 0 = Stability low bank angle
Flap sw 1 = Stability high bank angle
Flap sw 2 = Agility
Flight Modes:
F-Mode 0 = Stability low bank angle
F-Mode 1 = Stability high bank angle
F-Mode 2 = Agility
Flight Modes:
B-Switch 0 = Stability low bank angle
B-Switch 1 = Stability high bank angle
B-Switch 2 = Agility
5
Functions
installed is ready
®
EN

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis