Maintenance; Warranty - Ferm SSM1007 Übersetzung Der Originalbetriebsanleitung

• Retighten the Locking knob (12) by turning it
clockwise.
Speed Adjustment
Fig. A
The required speed can be adjusted by using the
Speed adjustment knob (3). Also during running
the rotational speed can be adjusted.
• To increase the speed, turn the Speed
adjustment knob (3) clockwise.
• To decrease the speed, turn the Speed
adjustment knob (3) anti­clockwise.
The required speeds depends on the material
and can be determined by practical testing.
Sawdust blower
Fig. A
The sawdust blower keeps the workpiece clean
for more accurate scroll cuts. For best results,
always direct air flow from the dust blow pipe at
the blade and workpiece. To adjust, simply bend
to desired position.

5. MAINTENANCE

Always disconnect the machine from the
main power supply before carrying out
any maintenance work.
The machine is designed to function faultlessly for
a long period and with a minimum of maintenance.
Extend its lifespan by regularly cleaning the
machine and treating it correctly.
Cleaning
Regularly clean the machine with a soft cloth,
preferably after each use. Keep the ventilator slot
free of dust and other deposits. Remove any
tenacious deposits with a soft cloth moistened
with soap. Do not use solvents (petrol, alcohol,
ammonia, etc.) as they will damage the plastic
parts.
Replacing the mains connection cable
The mains connection cable may only be replaced
by a special cable in a specialised workshop.
Replacing cables or plugs
Dispose of old cables or plugs immediately after
replacing them. It is dangerous to connect the
plug of a loose cable to a wall socket.
8
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be collected
at the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2012/19/EU for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
The product and the user manual are subject
to change. Specifications can be changed
without further notice.

WARRANTY

Read the warranty conditions on the separately
supplied warranty card.