Tascam CD-A700 Bedienungsanleitung Seite 7

CD Player
Basic Operation
1. Press the POWER switch.
2. Press the OPEN/CLOSE (∫) button.
The disc tray will slide out. Place the
disc gently on the tray with its label side
facing upward. The disc is set within
the disc guides at the center of the tray.
For 8 cm (3-inch) For 12 cm (5-inch)
CD singles Compact Discs
3. Press the OPEN/CLOSE (∫) button
again.
The disc tray will close.
Several seconds later, the following
information is displayed.
Total number of Total playback
tracks on the disc time of disc
Track numbers on disc up to 20
4. Press the CD PLAY (∏) button.
Disc playback starts from the first track,
and the ∏ (play) indicator will light.
O During playback, the number of the
currently played track blinks on the
music calendar.
O When tracks have been played, their
numbers will disappear from the music
calendar display.
∑ Even if the disc tray is open ...
When the CD PLAY (∏) button is pressed:
The disc tray will close and playback starts
from the first track.
∑ To stop playback
Press the STOP (∑) button. The player
enters the Stop mode.
To unload the disc:
Press the OPEN/CLOSE (∫) button;
playback stops and the disc tray will slide
out, and all functions are reset to their
initial settings.
To temporarily suspend playback
(Ready mode):
Press the ƒ button. Playback stops at the
current position and the ƒ indicator lights
steadily. To resume playback from the
same position, press the ∏ or ƒ button.
CAUTION :
O Do not force the tray by hand during
opening and closing operations.
_ 7 _
Music Search Operation
∑ Music search using
buttons (Ú/Æ)
The beginning of any track can be easily
located using the Ú/Æ SKIP buttons.
This operation is indicated clearly in the
TRACK display.
O This operation is possible even in the
Program Playback mode.
only programmed tracks will be
detected.
∑ To skip to the next track
Press the Æ button.
The player will skip ahead to the next track
each time the Æ button is pressed. The
player can be advanced to the last track
this way, but once the beginning of the last
track is reached, the player will not
advance even if the Æ button is pressed.
∑ To skip back to the previous track
Press the Ú button.
The player will skip back one track each
time the Ú button is pressed. If this
button is pressed in the middle of a track,
the player will skip back to the beginning of
the current track. To make it skip back to
the previous track, the button must be
pressed twice.
In this way, the player can be returned to
the beginning of the first track on the disc.
∑ Music search using SEARCH
n
butto s (/Ò)
During playback or in the Ready mode,
hold down the Ò button of the remote
control or the Æ button of the main unit
to move the playing position quickly in the
forward direction, and hold down the 
button of the remote control or the Ú
button of the main unit to move quickly in
the reverse direction.
During the manual search operation, sound
will be audible but the output level will be
lowered. This lets you search for any
required portion while checking the sound.
When the desired position is reached,
release the button to reenter the previous
mode.
or
SKIP
However,