Setting; Safety Information; Package Content; Installation - Avaya KB 22 Bedienungsanleitung

3

Setting

3.1

Safety information

Attention! Please refer to safety information on
page 14 before starting settings and installation.
3.2

Package content

The content of the package is:
Telephone KB 22
Operating instructions
3.3

Installation

To use the telephone plug the telephone line cord
into into a wall jack. The KB 22 is using Multi
Frequency dialling (MF).
3.4

R-Signal key

The "R"-Signal key is designed for using the KB 22
in connection with private exchanges or with
different network service providers..
Connection with private exchange
If KB 22 is connected with a private exchange you
can make use of all facilities such as call
forwarding or automatic recall by using the R-
Signal key.
The R- Signal key can be used with private
exchanges that work with Flash "100ms". Please
be sure that the Flash switch setting is set to
"100ms".
Network Service Providers
To use special features of Network Service
Providers ( e.g. call brokering or three- way
conferencing ) it is necessary to switch Flash
switch "300ms". For further information please
refer to your Network service Provider
16
- Setting -