Configuration; Changing The Master Pin - Simons Voss Technologies PinCode Online Kurzanleitung

3 Configuration

IMPORTANT
Cancellation of actions
All actions can be cancelled by not making any further inputs. The PIN
code keypad will cancel the action after a waiting period.
3.1

Changing the master PIN

You only need to carry out this step if no new Master PIN has been
programmed yet. You cannot start any configurations until you change
the Master PIN. The Master PIN can be changed at any time. No pro-
gramming is required to make a change. The Master PIN is unable to
open any locks.
IMPORTANT
Enter the numbers consecutively. There is a visual and audible feed-
back signal when input is complete.
a) Enter 000 0.
b) Enter the default or old Master PIN (default: 123 456 78).
ð PIN code keypad beeps and flashes green briefly twice.
c) Enter the new Master PIN.
ð The new Master PIN must consist of 8 digits and must not
30
start with 0.
SimonsVoss Technologies GmbH