Simons Voss Technologies PinCode Online Kurzanleitung Seite 39

d) Remove the battery.
e) Remove all other batteries in the same way.
IMPORTANT
All batteries will have discharged to roughly the same level. You there-
fore need to replace all batteries at the same time.
f) Insert the batteries with the positive terminal pointing upwards
(Sony, Panasonic or Varta CR2032 batteries [3 V]).
g) Carefully lock the battery holder back into place in the circuit
board.
h) Replace the front of the housing.
i) Re-fasten the two screws in the housing base completely.
ð Batteries have now been replaced.
Also see
SimonsVoss Technologies GmbH
39