Intended Use - Simons Voss Technologies PinCode Online Kurzanleitung

1 Intended use

Use the PIN code keypad MobileKey to operate locking devices by
entering an authorised User PIN (see section on Operation [} 36]).
You need to change the Master PIN and assign a User PIN to do so.
You can programme the PIN code keypad using the MobileKey web
app. The PIN code keypad is added as a "key" with PINs and as-
signed to a lock.
The PIN code keypad contains a LockNode with a "Chip ID" and is as-
signed to the SmartBridge located within range when the network is
configured. If a correct user PIN length has been entered, the PIN is
transmitted to the lock via WaveNet, where it is evaluated.
26
SimonsVoss Technologies GmbH