Product-Specific Safety Instructions; Configuration; Changing The Master Pin - Simons Voss Technologies ST10.08007S Kurzanleitung

MK/SI PinCode-Tastatur (on-
line)

3 Product-specific safety instructions

IMPORTANT
Master PIN loss
The Master PIN is an essential, integral part of the PIN code keypad se-
curity concept. No more administrative changes can be made to the PIN
code keypad if the Master PIN is lost.
1. Keep the Master PIN in a safe place.
2. Make the Master PIN visible for authorized persons at any time.

4 Configuration

NOTE
Cancellation of actions
All actions can be cancelled by not making any further inputs. The PIN
code keypad will cancel the action after a waiting period.

4.1 Changing the master PIN

You only need to carry out this step if no new Master PIN has been
programmed yet. You cannot start any configurations until you change
the Master PIN. The Master PIN can be changed at any time. No
programming is required to make a change. The Master PIN is unable to
open any locks.
EN
3. Product-specific safety instruc-
tions
37 / 180