Set To Storage Mode - Simons Voss Technologies PinCode Online Kurzanleitung

ð PIN code keypad beeps and flashes green briefly twice.
c) Enter the length of the User PIN – e.g. 4 for a 4-digit User PIN.
ð PIN code keypad beeps and flashes green briefly twice.
ð The User PIN length has been successfully changed.
3.3

Set to storage mode

IMPORTANT
If the PIN code keypad is to be used in a different MobileKey system,
the PIN code keypad not only needs to be deleted in the web app, but
also set to storage mode.
The PIN code keypad can be reset to storage mode. This process
also deletes all network settings.
IMPORTANT
Enter the numbers consecutively. There is a visual and audible feed-
back signal when input is complete.
a) Enter 000 00.
b) Enter the Master PIN.
ð PIN code keypad beeps and flashes green briefly twice.
ð Storage mode set.
32
SimonsVoss Technologies GmbH