Connections And Controls; Front Panel Features - Palmer PDREI Bedienungsanleitung

5) CONNECTIONS AND CONTROLS

1 2

FRONT PANEL FEATURES

1
INPUT
Connect your guitar to this socket using a high quality instrument cable
(for all guitar output levels).
2
NORMAL SATURATION
This controls the saturation of the power tubes. I.e. how much input
level the power tubes get.
3
TREBLE SATURATION
This also controls the saturation of the power tubes, however only in the
higher frequencies.
4
TONE
This is a simple tone knob - its behavior is comparable to the tone knob
of a normal guitar.
5
FIRST POWER TUBE - EL84
This controls the volume of the first power tube.
6
SECOND POWER TUBE - 6V6
This controls the amount of low frequencies in your sound.
7
THIRD POWER TUBE - 6L6
This controls the amount of midrange in your sound.
8
STANDBY
First turn on the power (STROM) and wait for at least 30 Seconds before
switching the standby off (switch set to BEREIT). Ideally you should wait
2-3 minutes, this prolongs tube life. The Standby switch can be used to
mute the amp and allows you to resume playing without having to wait for
the tubes to warm up.
3 4 5 6 7 8 9 10
13