Gastroback 40118 Bedienungsanleitung Seite 37

Step 4:
Place the juicer cover over the stainless
steel filter and integrated pulp contai-
ner. The humps of the rim of the juicer
cover should align with the small plastic
wings on the integrated pulp container.
Lower into position. The juicing cover
can be positioned in either of the plastic
wings on the integrated pulp container.
(Picture 3).
Step 5:
Raise the safety locking arm up and lock
into the two grooves on either side of
the juicer cover. The safety locking arm
should now be in a vertical position and
locked into place on top of the juicer
cover (Picture 1 and 2).
Step 6:
Slide the food pusher down the feed
chute by aligning one of the grooves in
the food pusher with the small protrusi-
on on the inside of the top of the feed
chute. Continue to slide the food pusher
down the feed chute (Picture 3).
Step 7:
Place the juice jug provided sideways
under the spout of the Easy Juicer. A
graphic on the lid shows where the jui-
cer spout is to be placed. Note the jug
is designed to clip in under the spout to
give it a positive location. A glass could
also be used to collect the juice, but
using the jug and lid is recommended
to avoid any splatter.
5
6
Small protrusion inside feed tube.
7
Food Pusher
Groove
37