9. SIMPLIFIED OPERATION CHART
Start the work again
Turn off the power
switch once.
Start the work again
Turn on the power switch.
The buzzer makes a "pip" sound.
The shears do not operate. (They
are in the standby mode.)
Press the standby mode switch with the trigger pulled.
The buzzer makes a "pip" sound.
* If the trigger lock lever has been
applied with the trigger pulled, re-
lease the lock to open blades.
Pull/release the trigger.
The blades move according to the
operation of the trigger.
If the trigger is pulled, the blades
close. If the trigger is released, the
blades open.
Do not operate the trigger for five minutes.
The buzzer makes a "peep" sound.
Then, the blades do not move even
if the trigger is pulled.
(The machine is returned to the
standby mode.)
Do not operate the trigger for 60 minutes.
The buzzer makes a "peep" sound.
Then, the blades do not move even
if the trigger is pulled. (The power is
turned off.)
Shears LED
The green LED
lights up.
Shears LED
The green LED
lights up.
Shears LED
The green LED
lights up.
Shears LED
The green LED
lights up.
Shears LED
OFF
28
LED indicates when the battery is
fully charged.
Control box LED
The green LED
lights up.
Control box LED
The green LED
lights up.
Control box LED
The green LED
lights up.
Control box LED
The green LED
lights up.
Control box LED
OFF