Velleman HAM06WS Bedienungsanleitung Seite 8

Submenu 3 - Call
Tel
This menu is used to program the telephone numbers to dial when the alarm is triggered. The
number must consist of minimum 3 and maximum 13 digits. The message "PATh TROUBLE" will be
displayed and a sound will be heard when the system has a faulty connection.
Tele1: Number of the central when there is a connection. Tele2 ~ 4: Numbers used for vocal
messages.
Enter the value "o" when the telephone number does not need to be dialled.
Dial
Menu used to program the number of calls. The default value is 3 times. Enter a number and
confirm with the # button.
Vibrant ring
Menu used to program the number of rings before the telephone (connected to the central unit) will
switch to the "Remotely Controlling the Central Unit" function (see below). The default (and max.)
value is 8 rings. Enter a number from 01 to 99 and confirm with the # button.
Note: unfortunately there is no direct relationship between the entered number and the number of
rings. E.g. 10 = 6 rings, 60 = 5 rings, 99 = 8 rings.
Submenu 4 – Del home
Press button 4 (del home) in the SETUP menu to erase all the zones assigned to the HOME mode (or
GUARD st). The previous menu will be displayed next.
"Study" Menu
This menu is used to program all the remote controls and wireless sensors into the system.
Submenu 1 – Remote
Possibility to program up to 4 different remote controls.
Select a remote by pressing a number (1 ~ 4) and confirm with the # button. The central unit will
display following message:
Next, press any button on the remote control. The central unit will emit a short beep and display the
previous menu. The remote control has been saved into the system. Repeat previous steps to save
more remotes.
Submenu 2 – Arm zone
This menu will be used to program up to 8 wireless sensors and to assign each of them to a particular
zone.
18.04.2017
HAM06WS
1. Tel
3. Vibrant ring
1. Tele 1
3. Tele 3
Input tel NO.
*************
Set dial times
**
Input ring times
**
1. remote
3. del
remote
be studying
Set arm zone NO.
**
2. Dial
2. Tele 2
4. Tele 4
2. arm zone
*
*
8
©Velleman nv