Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Specifications - Velleman HAM06WS Bedienungsanleitung

Drahtloses alarmsystem
Vorschau ausblenden Andere Handbücher für HAM06WS:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 35
Remarks:
o The alarm station only remembers the last added wireless sensor added to a zone! This means that per
zone, only one wireless PIR sensor can be used.
o The red LED will blink when the battery is almost drained (<7V).
o Do not install the sensor onto a metal support or plate.
o Keep the sensor away from direct sunlight and temperature variations (air conditioner, heating...).
10.
Door or window Sensor
Install the 2 sensors as illustrated on page 2 of this manual.
Make sure to align the triangles on both sensors and to keep the spacing between them less than 5mm.
Open the battery compartment and install the included 12V battery. Assign the sensor with a unique address
with the DIP switches. Close the sensor and program it into the central unit. The red LED on the sensor will
light at each door opening.
Remark: The transmitter will emit a sound when opening the battery compartment
11.

Technical specifications

Central Unit
PIR Sensor
4-Key Remote Control
Panic Button
Door Contact
Siren
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulted from (incorrect) use of this device.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual or may be copied, reproduced, translated or reduced to any electronic medium or otherwise without
the prior written consent of the copyright holder.
18.04.2017
HAM06WS
Power Supply
Standby Power
Working Frequency
Remote Control Range
Static Current
Alarm Volume
Detection Angle
Detection Distance
Power Supply
Static Current
Power Supply
Power Supply
Power Supply
Power Supply
Current
12VDC (incl.)
12VDC (incl.)
433Mhz
± 30m
150mA
> 90dB
110°
max. 12m
9VDC (order code 6LR61, not incl.)
30μA
3VDC (order code CR2032 button cell, incl.)
12VDC (order code GP23GA, incl.)
12VDC (order code GP23GA, incl.)
12VDC
< 800mA
10
©Velleman nv

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis