g. Menus
Programming menu
Press a number to enter the corresponding submenu. Example: Press "1" to enter the "Sys" menu.
"Sys" Menu
The "Sys" menu has following submenus:
Submenu 1 – Level
Sys level:
The message "Input sys level" will be displayed. The user can modify the system code to a personal
code (default "000000"). The code must consist of 6 characters and must be confirmed with the #
button. The user will be directed to the previous menu with a correct input.
User level:
The message "Input user level" will be displayed. The user can modify the user code to a personal
code (default "1234"). The code must consist of 4 characters and must be confirmed with the #
button. The user will be directed to the previous menu with a correct input.
Submenu 2 - Code
This menu is not used.
Submenu 3 - Report
Arm report:
A report is sent to the central unit.
No report:
No report is sent to the central unit.
Submenu 4 - Delay
This menu will be used to program the time needed for the alarm system to activate from the time the
user engages the system (in AWAY mode only). This delay will give the user enough time to leave the
secured zones before the alarm is triggered.
Time setting from 0 ~ 99 seconds
Example:
In this example, the delay has been set to 8 seconds in which the user will leave the secured zones
before triggering the alarm. The unit will emit a beep every second. Note that the delay time always
consists of 2 digits. Confirm with the # button.
"Zone" Menu
In the "Zone" menu each alarm zone (zone 01-12) can be separately assigned to a specific alarm type or
deactivate an alarm zone. Enter the zone number. The message "Input arm zone" will be displayed. The
entered value must be between 01 and 12. Confirm with the # button.
Remark: The first 4 zones (arm zone 1 - arm zone 4) are assigned to the sensors connected to terminals
5 ~ 8. The wireless sensors (included) are assigned to zones 5 ~ 12.
18.04.2017
HAM06WS
1. Sys
3. Setup
1. Level
3. Report
1. Sys level
2. User level
Input sys level
******
Input user level
****
1. Arm report
2. No report
Input delay
0
8
2. Zone
4. Study
2. Code
4. Delay
**
#
6
©Velleman nv