Usb Operation - auna 10031949 Bedienungsanleitung

Note:
• If the signal strength is weak, your Bluetooth receiver may disconnect,
but it will re-enter pairing mode automatically.
• For a better signal reception, remove the obstacles between the unit
and the Bluetooth device.
• This unit supports A2DP (Advanced Audio Distribution Profile) and
AVRCP (Audio Video Remote Control Profile) functions. This can only be
paired with one Bluetooth device at one time.
• Compatibility with all devices and media types is not guaranteed.
• Some mobile phones with the Bluetooth function may connect and
disconnect as you make and end calls. This is not an indication of a
problem with your unit.

USB OPERATION

1 There is an USB socket located at the front of the unit. When a USB
device is connected to the unit, press the FUNCTION button repeatedly
on the unit or press the USB/CD button on the remote control to select
USB mode.
2 The unit will automatically display the total number of tracks.
3 All playback features are the same as if you were playing an MP3 CD.
REP_ONE : Press the REPEAT button once, "REP_ONE" will show on the
display. It will play the current track repeatedly.
REP_ALBUM : Press the REPEAT button twice, "REP_ALBUM" will show on
the display. It will play the current folder repeatedly.
REP_ALL : Press the REPEAT button three times, "REP_ALL" will show on the
display. It will play all files repeatedly.
REPEAT OFF: Press the REPEAT button once more again, the repeat function
will turn off.
EN
41