Fm Operation - auna 10031949 Bedienungsanleitung

EN
36

FM OPERATION

SWITCHING FROM DAB TO FM MODE
To switch the unit to FM mode, press the FUNCTION button repeatedly
to select FM mode or press the DAB/FM button on the remote control to
switch to FM mode. The display will show the frequency.
Auto Scan
Press the SCAN button until the tuner starts searching for a station. To scan
down the frequency band, press and hold the SCAN button. Once a station
has been found, the scanning will stop automatically.
Manual Scan
To search for FM stations manually, press the |<< or >>| buttons repeatedly
until your desired frequency is reached.
Scan Setting
This is a scanning option to scan all stations, or just scan stations with a
strong signal.
1 Press the MENU button, then press the |<< or >>| buttons to select
"Scan setting". Press the ENTER button to confirm.
2 Press the |<< or >>| buttons to select "All stations" or "Strong stations
only". Press the ENTER button to confirm.
Audio Setting
This unit will automatically switch between stereo and mono mode, but
you can override this and switch this function manually. This can be helpful
when receiving poor signal reception.
1 Press the MENU button, then press thebuttons to select "Audio setting".
Press the ENTER button to confirm.
2 Press thebuttons to select "Stereo allowed" or "Forced mono" and then
press the ENTER button to confirm.