Electrical Safety Precautions - HEIDENHAIN ND 280 Installationsanleitung

Installation Instructions en
2.3.2

Electrical safety precautions

DANGER
When opening the product, there is a possibility of
coming into contact with live electrical components.
This may result in electric shock, burns or death.
In addition, opening the product will invalidate the
guarantee, warranty and liability of the manufacturer for
any resulting accidents, personal injury or equipment
damage.
Never open the housing.
Only the manufacturer is permitted to access the
inside of the product.
DANGER
Direct or indirect contact with live electrical components
will lead to a dangerous amount of electricity passing
through the human body.
This may result in electric shock, burns or death.
Work on the electrical system and live electrical
components is only to be performed by trained
electrical specialists.
For power connection and all interface connections,
use only cables and connectors that comply with
applicable standards.
Use only fuses with the prescribed classification. For
more information: see "Specifications", page 24.
Have the manufacturer exchange defective electrical
components immediately.
Regularly inspect all connected cables and all
connectors provided on the product. Defects, such
as loose connections or scorched cables, must be
removed immediately.
NOTICE
This product contains components
that can be destroyed by electro-
static discharge (ESD).
It is essential to observe the safety
precautions for handling ESD-sensiti-
ve components.
Never touch connector pins without
ensuring proper grounding.
18
3 Mounting
The following steps are only to be performed by
qualified personnel!
For more information: see "Personnel
qualification", page 16.
Unpacking
Open the top lid of the box.
Remove the packaging materials.
Unpack the contents.
Check the delivery for completeness.
Check the delivery for damage.
If any components were damaged in transit,
keep the packaging materials for inspection and
contact your HEIDENHAIN distributor or OEM.
This applies also if you need replacement parts.
In case of damage in transit
Have the shipping agent confirm the damage.
Keep the packaging materials for inspection.
Notify the sender of the damage.
If necessary, contact your distributor for mediation.
Contact your HEIDENHAIN distributor or OEM for
replacement parts.
Items supplied
The following items are included in the shipment:
Device
2.5 m long power cable with European plug
Installation Instructions
Addendum (optional, for more information see "Notes on
reading the documentation", page 15)
ND 200