Technical Information - Exsys EX-41384 Anleitung

English
6. Driver Installation
CHECK THE INSTALLED DRIVER
Click at >Start< >Programs< >Administrative Tools[Common]< >Windows NT-
Diagnostics< then click at >Resource< >IRQ<. Here you should find the entry „09
o 0 PCI". Then click at >I/O-Port< here you should see the entries „D400-D407
sysbase 0 PCI" „D800-D802 sysbase 0 PCI" and „DC00-DC1F sysbase 0
PCI" for the ports. The I/O addresses can change depends which system and card is
installed. If you see these or similar entry's the card is installed correctly.
SCO UNIX / LINUX
The drivers are located in the following folder on our driver CD:
"D:\IO\SYSTEMBASE\DRIVERS\PCI\SCO"
Because each individual distribution and kernel version of Linux is different, sadly we
cant provide a installation instruction. Please refer to the installation manual for stand-
ard IO ports from your Unix/Linux version! In some newer versions of Linux the card will
even be installed automatically after starting Linux.

7. Technical Information

Operating Temperature:
Storage Temperature:
Rel. Humidity:
Size:
Weight:
32° up to 131° Fahrenheit
-40° up to 167° Fahrenheit
5% to 95%
130 x 34 mm
500g
14
EX-41384