Troubleshooting - Vitek VT-1765 Betriebsanweisung

ENGLISH
− Before you take the filter-cartridge (5) away for storage, clean and dry it, keep the filter cartridge
in a cool dark place.
− Keep the humidifier in a dry cool place out of reach of children.

TROUBLESHOOTING

Failure
The display is not
lighting.
Power indicator is
lighting, no "steam"
formation.
"Steam" has an
unpleasant smell
Small intensity of
"steam" output
Abnormal noise during
operation of the unit
NOTE:
Non-observance of rules for cleaning the unit from mineral deposits caused by hard water may
affect the overall performance of the unit. In this case clean the unit, replace the filter-cartridge
(5) if necessary. If used water is too hard, use household filters to purify water or mix tapping
water with distilled water in proportion 1:1.
DELIVERY SET
1. Instruction manual – 1 pc.
2. Removable nozzle - 1 pc.
3. Removable water tank lid – 1 pc.
4. Filter-cartridge – 1 pc.
5. Remote control 1. pc.
6. Brush for cleaning – 1 pc.
7. Instruction manual
VT-1765.indd 8 VT-1765.indd 8
Possible causes
No voltage, no power supply
There is no water in the water
tank.
New device – it is normal
Polluted or stagnant water
Polluted "sprayer"
The unit is placed on the
uneven or unstable surface
8
Troubleshooting
Plug the unit
Plug in another, properly operating
device, to make sure that the socket
is in good operating condition.
Fill the water tank with water.
Unscrew the lid of the water tank,
pour out water and leave the unit for
12 hours in a cool dark place
Unplug the unit, remove the water
tank, pour out water, wash the water
tank, and fill the water tank with
boiled or distilled water.
Unplug the unit and clean the
sprayer.
Unplug the unit and even the body
of the unit or move the humidifier to
another place.
29.09.2011 12:33:20 29.09.2011 12:33:20