Assembly and operating instructions
ELTRAL KS 30/40 Solo
Chain drive
11 Components and accessories
Chain drive ELTRAL KS 30/40
ELTRAL KS 30/40 - 230V
ELTRAL KS 30/40 - 24V
*= color: 1 = grey (RAL7047); 6 = black (RAL9005); 7 = white (RAL9016)
Accessories for chain drive ELTRAL KS 30/40
(Examples of use see chapter „17 Examples of use" on page 32)
Chain holder for top hung sash
Bag of chain holder for top hung sash - small
Bag of bracket
Bracket set for sash mounting
Power supply unit with checkback signal
Power supply unit without checkback signal
Testing and setting apparatus
*= color: 1 = grey (RAL7047); 6 = black (RAL9005); 7 = white (RAL9016)
Security stay Euro-Solid
K-17915-00-0-8
K-17915-01-0-8
K-18046-00-0-8
For installation see application diagram
º
The installation of the security stay may require a profile-related base plate. See catalogue.
º
Fastening kits vary depending on installation method, profile system and profile material.
º
12 Maintenance and care
To ensure a problem-free operation, you must perform the following jobs after every 1,000
opening cycles, however, at least once a year.
Check all screws to ensure they are tight and retighten them if necessary.
º
Check if the window sash is seated perfectly in the window frame. Adjust fixings if
º
necessary.
Check all parts for damage and wear. Replace parts where necessary.
º
Never use acidic or basic cleaning agents. Do not immerse the appliance in water.
º
Do not try to repair the drive yourself in case of failure. Do not remove the casing or
º
other parts. In case of signs of damage to the appliance contact the manufacturer. Only
spare parts supplied by the manufacturer may be used for repair.
28
(for aluminium or timber windows without lateral locking point)
(for aluminium or timber windows without lateral locking point)
(for timber windows with lateral locking point))
K-17433-00-0-*
K-17434-00-0-*
9-44272-00-0-*
K-17441-00-0-*
K-17440-00-0-*
K-17720-00-0-8
6-37487-00-0-0
6-37487-01-0-0
K-17736-00-0-0