Safety Information For The User - Sentiotec Cp-Rmc-35 / 1-041-405 Gebrauchsanweisung

Instructions for installation and use
combi sauna heater must not be used together with other sauna
heaters in a sauna cabin.
● The roof and walls of the sauna cabin must be manufactured
from low-resin, untreated or thermally treated wood, e.g. Nordic
spruce, hemlock, pine or fir, or from laminated wooden materi-
als. If laminated wooden materials are used, make sure that the
adhesive used in them does not produce formaldehyde. If other
materials than wood are used in the sauna cabin, these materi-
als must be heat-resistant and corrosion-resistant and must not
cause any negative effects on the health of the sauna users.
● The height of the sauna cabin must be at least 1.64 m.
● Observe the specifications on volumes and on ventilation of the
sauna cabin in chapter 10. Technical data.
● When positioning the sauna heater, observe the minimum safety
distances (see chapter 4.2. Safety intervals).
● Also comply with the regulations applicable at the installation
location.
● For your own safety, consult your supplier in the event of prob-
lems that are not explained in sufficient detail in the installation
instructions.

2.3. Safety information for the user

p. 6/34