Manual Adjustment; Electronic Adjustment - AEG GS45BV221 Benutzerinformation

70 www.aeg.com

Manual adjustment

Electronic adjustment

1. Press the on/off button to activate the
appliance.
2. Make sure that the appliance is in set-
ting mode. Refer to 'SETTING AND
STARTING A PROGRAMME'.
3. Press and hold function buttons (B)
and (C) at the same time until the indi-
cators of function buttons (A), (B) and
(C) flash.
4. Press function button (A).
• The indicators of function buttons
(B) and (C) go off.
FILLING THE SALT CONTAINER
Turn the water hardness dial to the posi-
tion 1 or 2.
• The indicator of function button (A)
continues to flash.
• The acoustic signals operate. Exam-
ple: five intermittent acoustic signals
= level 5.
• The display shows the setting of the
water softener. Example:
el 5.
5. Press function button (A) again and
again to change the setting.
6. Deactivate the appliance to confirm.
CAUTION!
Only use dishwasher salt. Other
products can cause damage to
the appliance.
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it, af-
ter you fill the salt container, start
a programme.
1. Turn the cap counterclockwise and
open the salt container.
2. Put 1 litre of water in the salt contain-
er (only for the first time).
3. Fill the salt container with dishwasher
salt.
4. Remove the salt around the opening
of the salt container.
5. Turn the cap clockwise to close the
salt container.
= lev-