Wiring Diagram; Using The Control Panel - Exodraft EW 41 Produktinformationen

3110056-2011-06-30

4.4.2 Wiring diagram

34

4.5 Using the control panel

Button functions
NB: Both red wires from the temperature sensor must be attached to terminal 7, and both white wires to
terminal 8.
Action
Button
• Press to activate display light
• Press to start chimney fan
• Press to stop chimney fan
• Press to go back one step in the user and ser-
vice menu
oK
Button
• Press for 3 seconds to activate the user menu
• Press to make selections in the user menu
• Press to add fuel
Button and
• Press to browse in the user and service menu
• Press to increase or decrease the chimney fan
speed
GB
Illustration
Project: A
Title:
EW41
Draw. No.:
Material: Format: A3
Date: 03-09-2010 Rev. No.: Ref.: Weight: 0,000 kg Purchase
Rev.:
pmn Approved: Replaces:
Unless otherwise specified tolerances are after DS/EN 22768 m * Control measurement
A
Project:
Title:
EW41
Draw. No.:
Material: Format: A3
Date: 03-09-2010 Rev. No.: Ref.: Weight: 0,000 kg Purchase
Rev.: pmn Approved: Replaces:
Unless otherwise specified tolerances are after DS/EN 22768 m * Control measurement
Project: A
Title:
EW41
Draw. No.:
Material: Format: A3
Date: 03-09-2010 Rev. No.: Ref.: Weight: 0,000 kg Purchase
Rev.:
pmn Approved: Replaces:
Unless otherwise specified tolerances are after DS/EN 22768 m * Control measurement
100268
100268
100268