Bosch MultiTalent 3 MCM3 Serie Gebrauchsanleitung Seite 14

en For your safety
To prevent injury, a damaged power cord must be replaced by the
manufacturer or his customer service or a similarly qualified person.
Only our customer service may repair the appliance.
Safety instructions for this appliance
W Risk of injury
W Risk of electric shock
If the power is interrupted, the appliance remains switched on and
restarts when the power is restored. Never immerse the base unit
in liquids or place under running water and do not clean in the dish-
washer. Before rectifying a fault, pull out the mains plug.
W Risk of injury from the rotating tools!
While the appliance is operating, never place fingers in the mixing
bowl. Always use the pusher for adding ingredients. After switching
off, the drive continues running for a short time. Change tools only
when the drive is at a standstill.
W Risk of injury from sharp blades/rotating drive!
Never reach into the attached blender jug! Do not remove/attach the
blender jug until the drive has stopped. Do not remove/attach the
universal cutter jug until the drive has stopped.
W Risk of injury from sharp blades!
Do not touch blades of the universal blade with bare hands. When
not in use, always store the universal blade in the blade guard. Clean
them with a brush. Do not grip the sharp blades or edges of the
cutting discs. Grip the discs by the plastic part in the centre only! Do
not place fingers in the feed tube. Only use the pusher when adding
more ingredients. Do not touch blades of the blade insert with bare
hands. Clean them with a brush.
W Risk of scalding!
If processing hot liquids, steam escapes through the funnel in the lid.
Add a max. 0,4 litres of hot or frothing liquid.
W Risk of injury!
Never assemble accessories on the base unit.
W Important!
It is essential to clean the appliance thoroughly after each use or
after it has not been used for an extended period. X "Cleaning and
servicing" see page 18
14