Turning The Camera On - Märklin 49940 Handbuch

Turning the camera on

Tip: Only the 6021 Control Unit can be used to
turn the camera on! Switch 2 on the back of the
Control Unit must be set at „on" to do this!
When the 6020 Central Unit or the 6607 DELTA
Station is used, the camera is on continuously.
ON
1 2 3 4
1 2 3 3 4 5 6
Press the „f1" button to turn the camera and the
sender on and to call up the corresponding
address.
Tip: The LED over the button „F" in the right lower
corner of the keypad must be on. If it does not,
press this button and then enter the address for
the video car again.
78
control unit
19