PeakTech 2025 Bedienungsanleitung Seite 48

8. Data Transmission Program
8.1. System Requirement
To run this application, there are some requirements for the system as
follows:
Operating system:
Harddisk space:
The meter has serial data output function. It can be connected with PC
by USB interface, so the measured data can be recorded, analyzed,
processed and printed. Before use this function, you need install the PC-
Link software and USB driver in your PC.
Press the USB/REL button for 2 seconds. The meter enters PC mode,
the symbol "RS-232" will appear on LCD, and the serial data output
function is active.
Microsoft Windows
2000 / XP / VISTA 32 & 64Bit /
Win 7 32 & 64Bit
approx. 20 MB free space
-47-