Error Indication - Comprag A0708 Bedienungsanleitung

Appearance
User menu
In order to choose other user menus, press
Appearance

4.2 Error indication

Warning messages
WARNING signal
Code Description
A:2118 High pressure, alarm signal when set limit is exceeded
A:2128 High temperature, alarm signal when set limit is exceeded
A:2816 Power failure detected
A:3423 Temperature lower than that permitted - Intake valve opening block
А:4804 Time for performing maintenance has lapsed
26
Mode
Standby
Unloading
Loading
Total running time of compressor in hours
Operating time in Loading mode
Operating time before maintenance work in hours (timer counts total
operating time)
constantly shown when the compressor continues running.
Description
The motor is switched off. When the starting
pressure is reached, the motor starts up auto-
matically. There is no compressed air genera-
tion.
The motor is switched on. The Solenoid valve is
de-energized and the Intake valve is closed. The
timer displays a countdown in seconds to the
switching to modes Standby or Loading. There is
no compressed air generation.
The motor is switched on. The Solenoid valve
is energized and the Intake valve is open. Com-
pressed air generation is started.
"Up" or "Down".
Description
Version 1.2