Operation; The Baby Unit; The Parent Unit - switel BC-108 Bedienungsanleitung

4

Operation

4.1

The baby unit

Position the baby unit near to the baby. Please observe the minimum distance of one metre. For
best transmission, the integral microphone should be pointing towards the child.
Now select one of the two channels A or B with the channel switch
units must be set to the same channel.
The baby unit is now ready for use and the integral microphone will continuously transmit any noise
made by your child.
The indicator light
mode, the indicator light will show red if the battery needs to be changed.
To switch off the baby unit, slide the channel switch
Note: Check that both units are working properly each time before using.
4.2

The parent unit

Select one of the two channels A or B with the channel switch
must be set to the same channel. The parent unit is now ready for use. Set the required volume with
the slider on the right-hand side.
The indicator light
battery if the indicator light shows red.
To switch off the parent unit, move the slide switch
32
- Operation -
will always show green when the baby unit is switched on. In battery
shows green when there is sufficient battery capacity. You should change the
. The parent and baby
to the OFF position.
. The parent and baby units
to the OFF position.