Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Paging the receiver unit
If you have mislaid your receiver unit, you can sound a paging tone to
find it.
The paging function can only be activated when both units
are switched on.
1.
Press the Paging button on the transmitter unit to activate the
paging function.
2.
Press the Paging button on the transmitter unit again to
deactivate the paging function.
Maintenance
1.
Disconnect the equipment from the mains power supply before
cleaning it.
2.
Clean the housing surfaces with a soft, fluff−free cloth.
3.
Do not use any cleaning agents or solvents.
5 Fault Diagnosis
Trouble
1
No function
Cause
Receiver unit is
switched off
Batteries are
empty
Power adapter
plug is possibly not
connected
Solution
Switch the receiver
unit on
Charge the batte-
ries and check that
the status LED
has lit up
Check the connec-
tion of the power
adapter plug
33
Werbung
Inhaltsverzeichnis
