Fork Installation; Installation Instructions - SR Suntour NRX S ELD 700C LTD Bedienungsanleitung

SR SUNTOUR - OWNERS MANUAL

FORK INSTALLATION

WARNING!
SR SUNTOUR strongly recommends that your fork is being installed by a trained and qualified
bicycle mechanic. Special knowledge and tools are essential to install SR SUNTOUR forks.
Common mechanical knowledge may not be sufficient to install a SR SUNTOUR suspension
fork. If you intend to install the fork by yourself, the whole job has to be inspected by a
trained and qualified bicycle mechanic. Please note, that improperly installed forks are
extremely dangerous and can cause damage to the product, serious injuries or even death.

INSTALLATION INSTRUCTIONS

Please note that their are additional steps required to install your NRX S ELD
700C LTD fork to your bike. You will find all necessary instructions on the DVD
which is attached to this manual.
Note! All fixing bolts have to be tightened with the proper fasting torque stated by the
manufacturers
1. Remove the existing fork from your bicycle. Afterwards remove the crown race from the
fork.
2. Measure the length of your old fork's steerer tube against the length of the SR SUNTOUR
fork steerer. SR SUNTOUR suspension forks are delivered with a standard steerer tube
length of 255mm. Therefore the steerer tube may need cutting to the proper length.
3. In order to define the proper length of your steerer tube you can apply the
following formula:
Frame's head tube+Head sets stack height+Spacers+Stem's clamp height-
If your SR SUNTOUR fork does come with a threadless steerer tube, do not add a
thread to it. SR SUNTOUR'S fork steeres are a one time press fit which can not be
removed. Do not try to replace the steerer tube by a steerer tube with a threaded
steerer. This will void the warranty of your fork and result into a failure of the
4. Install the headset crown race (30mm for 1 1/8") firmly against the top of your fork
crown. Install the fork unit (headset,spacers,stem) back on the bike. Adjust the headset
until you do not feel play anymore. Also refer to the headset's manufacturer installation
instructions.
Please note that their are additional steps required to install your NRX S ELD
700C LTD fork into your bike. you can find detailed instructions on the DVD which
is attached to this manual.
product or could cause fatal injuries or even death to the rider.
Warning!
NRX S ELD 700C LTD
3mm clearance
English
7