Inhaltsverzeichnis
Werbung
Follow these steps by:
1. Disconnect the device from the air supply.
2. Unlock and remove the quick-change magazine.
3. Drain, if necessary, the stitching head magazine (see Section 5.2).
4. Attach the quick-change magazine (11) for the desired clamp size.
5. Remove for lengths from 50 mm adapter on the staple guide (see Section 6.2).
6. Fill the magazine with quick clamp bars of desired size
6.2 Removing the clamp guide adapter
Image 4.3.2/1: Removing the clamp guide adapter
Bild 4.3.2/1: Demontage des Klammerführungsadapters
For removing the clamp guide adapter to solve parentheses following work steps:
1. Make sure that the unit is separated from the air supply.
2. Loosen the screws (B2).
3. Pull the adapter (B1).
4. Tighten the screws (B2) again.
7 Maintenance
Comply with the listed maintenance intervals to ensure continuous faultless operation.
Disconnect the compressed air supply during every maintenance.
Weekly
•Clean the tool with compressed air.
•Lightly grease the movable parts.
•Check the tool for leaks, damages, completeness of all parts and tightness of all screws.
8 Repairs
Repairs may only be carried out by personnel authorized by the manufacturer or other
competent professionals using original Senco spare parts.
9 Warranty
The device was developed and manufactured in accordance with the latest technical knowledge. We provide the initial
purchaser with a warranty according to statutory requirements for function, materials, and processing. Normal wear and
tear is excluded.
The warranty ends if improper treatment, use of force, repairs by third parties, or the installation of non-original
replacement parts is evident.
The warranty covers repair or replacement at our discretion. A warranty extending beyond the scope of delivery is
precluded, since proper and expert use of the device is outside our control.
Please note our terms of business!
10 Disposal
Take the device, packaging, and accessories to an environmentally friendly recycling centre (in accordance
with European Parliament and Council Directive 2002/96/EC of January 27, 2003).
B2
B1
GB
9
9
Werbung
Kapitel
Inhaltsverzeichnis
