WIKA PU-448 Betriebsanleitung Seite 20

8. Configuration of the models T12, T24, ...
Editing instrument data (configuration)
Menu item "Instrument data" → select "Edit instrument data" to open
the instrument data window
GB
Read the configuration data from the transmitter ("Instrument" →
"download from instrument"). Confirm with "OK".
Access to operation-related functions and parameters such as: sensor
type and connection, measuring range and temperature unit, output
signal, output limits and error signaling, identification of the measuring
point (MSR information)
8.2 Software version WIKA_TT
Special features
Establishing connection to a model T24 temperature transmitter or
model TR21, TR30 or TR31 resistance thermometer through the menu
item "Instrument" → "Download from instrument"
Displays the configuration data of the connected instrument
Access to operation-related functions and parameters such as:
sensor type and connection, measuring range and temperature unit,
output signal, output limits and error signaling on sensor burnout,
identification of the measuring point (MSR information), write
protection function and diagnostics possibilities.
The lower limit of the measuring range is configurable between
-200 ... +200 °C (T24.10.2Px) and -150 ... +150 °C (T24.10.1Px)
(for this, see also the diagram in the data sheet). The configuration
software checks the required measuring range and only accepts
permissible values. Intermediate values are configurable; the smallest
increment is 0.1 °C. Process adjustment can, if required, be carried out
under the heading "Adjustment". A printout of the configuration log is
possible under the heading "Report".
20
Always store configuration data in the instrument following
a change. The extended Help program can be opened
using the F1 button. The Help program serves to assist with
the configuration and to explain the terms used.
WIKA operating instructions programming unit PU-448