ausdom ANC7 Anleitung Seite 3

4. Charging the Battery
Connect the micro USB charging cable to any power
source and the USB interface for charging located on the
side of the ear cup. The headset LED turns to solid red
during charging. It takes about 2-3 hours for the first
charge and after charging for as long as 1-2 hours. When
the battery is fully charged the LED turns off.
You can also use the Wireless function during charging
but will extend the charging time. If you use the audio
cable or turn the headset off for charging that will not
affect the charging time.
When the battery is low, the LED keeps on red. At the same
time ANC7 also provides a low battery warning tone.
Note: It is strongly recommended fully charging for the
first use.
Micro USB interface for charging
5. Pairing with Bluetooth Devices
5-1Pairing the headsets with a computer
Before pairing the headset with your computer, please make
sure your computer or laptop has the built-in Bluetooth
feature. If not, you must purchase a Bluetooth dongle,
preferably version 2.1 or above.
1. Make sure the headset is off.
2. Start the Bluetooth program in the computer.
3. The "Search new device" screen will be displayed.
4. Do not place both devices more than one meter away from
Micro USB charging cable
EN-2
Any power source
for USB use